Tools
Everything for your business energy bill in one place
Check a bill
Upload up to five bills and find out what doesn't add up, with a complaint email ready to send.
Start free check →CCL rates and calculator
Levy rates for 2026/27 in p/kWh and £/MWh, and a calculator for your kWh and dates.
CCL ratesCalculatorVAT on business electricity
20%, 5% or the temporary 0% (from 1 October 2026 to 30 June 2027). Check which one applies.
VAT guideDo I qualify?How it works
Three steps, no sign-up
- UploadAdd up to five bills as PDFs or photos. Add your contract rates and half-hourly data if you have them.
- We read and checkAn AI model reads the figures. A fixed set of rules then checks them against the bill and the UK rates for its dates.
- See what to doEach finding shows what the bill says, what we expected and why, plus a complaint email to send your supplier.
Free · No sign-up
Check your UK business energy bill in under a minute
Upload a bill (PDF or photo). You see whether the VAT rate, Climate Change Levy, standing-charge days, meter reads and line maths add up, with the working and the official source for every finding.
- No account needed
- Bills deleted within 24 hours (30 days only if you opt in)
- No tracking cookies
Your bill stays private. Uploaded bills are deleted within 24 hours (30 days only if you tick the opt-in). We keep an anonymised record with no names, addresses, account or meter numbers. No tracking cookies. Read the privacy notice.
Guides
Learn before you complain
- How to check your business electricity billStep-by-step, line by line.
- Standing charge billed for the wrong number of daysHow to spot it and what to ask for.
- Complaining about a business energy billWhat to send, to whom, and when to escalate.
- About CheckEnergyBillWhat the service does and does not do.
Coverage
The 14 checks on every UK business energy bill
CheckEnergyBill compares each figure on your electricity or gas bill with the contract you signed, the meter readings, the arithmetic and the UK VAT and Climate Change Levy rules for the billing dates. Select any check to see what it covers and why it matters for your costs.
1. Bill read clearly
What we check. Before any arithmetic runs, we confirm the bill read clearly enough to check: the billing period, the charge lines, the net total and the total. If something is missing or unclear, the report says so and you can upload a clearer PDF or photo instead of trusting a partial result.
Why it matters. A check that silently skips a missing figure gives false comfort. Photos should show the whole page, without cropping or glare.
2. Meter number (MPAN) valid
What we check. An MPAN (Meter Point Administration Number) identifies your electricity supply point. The 13-digit core ends in a check digit calculated from the other digits. We run the standard check digit calculation on the number printed on the bill.
Why it matters. A failed check usually means a typo on the bill or the wrong supply point. A wrong meter number can send the bill, and any dispute, to the wrong account.
3. Standing-charge days
What we check. Standing charges are charged per day. The number of days billed should equal the number of days in the billing period. We compare the days on the bill with the dates shown.
Why it matters. Standing charge billed for too many days, for example 34 days on a 31-day period, is one of the most common overcharges on business energy invoices. Small daily amounts add up across every meter and every month.
4. Units match meter reads
What we check. Units billed should match the difference between the closing and opening meter readings for the period, after any multiplier. We show both numbers so you can compare them with the meter or half-hourly data.
Why it matters. A mismatch can mean the supplier billed on the wrong readings, an estimate that was never corrected, or a missed meter change.
5. Actual reads
What we check. Suppliers sometimes bill on estimated readings when they cannot get an actual read. We flag a bill whose closing meter read is marked as an estimate. Applies to bills that show meter reads.
Why it matters. Estimates can be correct, but long runs of them often lead to large catch-up bills months later. Flagging them early lets you ask for an actual reading or a correction while the figures are still recent.
6. Line calculations
What we check. Each line should equal its quantity multiplied by its unit rate, rounded to the penny. We recalculate every line and show any difference in pounds.
Why it matters. Small line errors add up over many lines and many months, and they are easy to miss when the total looks plausible.
7. Subtotal
What we check. The net charge lines should add up to the subtotal printed on the bill, before VAT.
Why it matters. A wrong subtotal means the total is wrong even when every individual line looks reasonable.
8. VAT arithmetic
What we check. The VAT charged should be the stated percentage of the net amount. We check the arithmetic on each VAT line.
Why it matters. This separates a calculation error from a rate error. Check 9 covers whether the rate itself was right.
9. VAT rate
What we check. Business electricity and gas can carry different VAT rates depending on the supply, how it is used and the dates. The standard rate is 20%. A reduced rate of 5% applies to qualifying supplies, such as very small supplies or mainly domestic use, with a temporary 0% for qualifying electricity in Great Britain from 1 October 2026 to 30 June 2027. We compare the rate charged with the rate that applies to each billing period and tell you when a different rate may apply.
Why it matters. Charging the standard rate where a reduced or zero rate applies overstates your VAT, and the difference can be large on a year of bills. Most VAT-registered businesses pay the standard rate and reclaim it, so check whether the qualifying conditions really apply to your site before you raise it. The official HMRC source is linked in each finding.
10. Bill total
What we check. The amount due should equal the net charges plus VAT, after any credit or previous balance shown on the bill.
Why it matters. A total that does not reconcile is one of the clearest signs of a billing error, and it is the figure you are actually paying.
11. Climate Change Levy
What we check. Climate Change Levy is charged on electricity, gas and some other fuels supplied to businesses and public-sector users, and its rates change each financial year. Domestic use, non-business charity use and very small amounts of energy are exempt, and businesses with a climate change agreement pay a reduced rate. We check whether CCL is charged, whether it appears to be due, and whether the rate matches the billing dates.
Why it matters. CCL can be charged when an exemption applies, or at an outdated rate. Check any exemption declaration or certificate you have given your supplier. Our CCL rates page and calculator let you check the figures yourself.
12. Your contract
What we check. If you tell us your contract, we compare the unit rates and standing charges on the bill with the prices you agreed. Without the contract, this check is skipped and the other checks still run.
Why it matters. Rates that differ from your contract are the simplest billing error to prove, because your signed terms are the reference.
13. Rollover rates
What we check. When a fixed contract ends without renewal, suppliers often move the site onto a more expensive out-of-contract or deemed rate. We look for a contract end date (if you give us one) that falls before the bill period starts, or wording such as rollover, deemed or out-of-contract on the tariff or charge lines, and report a potential rollover.
Why it matters. Rollover rates can add a large premium without any new agreement. Spotting them early gives you time to renegotiate or ask for the contract terms.
14. Back-billing
What we check. Under Ofgem's back-billing rule (supply licence condition 21BA), a supplier may only recover charges for energy that could reasonably be considered used in the 12 months before it takes charge recovery action, such as sending a bill. The rule covers microbusinesses. It does not apply where the supplier could not bill the correct amount because of the customer's obstructive or manifestly unreasonable behaviour, or where an accurate bill was already sent and is still unpaid. Tick micro-business in the check to get a firm result; otherwise we show a note asking you to confirm. If the bill date or period cannot be read, this check is skipped.
Why it matters. Back-billing can produce a large one-off bill. A microbusiness is defined by employee numbers, turnover and annual energy use, and larger businesses are not covered by this rule, so check your contract and supplier terms too.
FAQ
Questions
Is it really free?
Yes. The check is free while we test it, and you don't need an account. Email is optional and only used if you ask for a report or updates.
Which bills can it check?
UK business electricity and gas bills, as a PDF or a clear photo of the whole page. Half-hourly data (CSV or Excel) is optional.
Is this advice?
No. It is an automated check that can contain mistakes. Check the figures against your bill before you act, and raise any issue with your supplier first.
Where do the rates come from?
From the official sources, such as HMRC's VAT Notice 701/19 and the GOV.UK Climate Change Levy rates page. Each finding links to the source and the dates it applies.
What happens to my bill?
It is read by Google's Gemini model on Vertex AI to pull out the figures, then deleted within 24 hours unless you opt in to 30 days.
What if the check finds an error?
You get a ready-to-send complaint email with the figures and sources. If your supplier doesn't fix it within 8 weeks, micro and small businesses can go to the Energy Ombudsman.
Do you sell energy or take commission?
No. We don't sell energy, broker contracts or take commission from suppliers.
Do I need my contract to use it?
No. The bill-only checks, covering VAT, CCL, the maths and standing-charge days, run from the bill alone. Adding your contract rates and end date unlocks the contract check and sharpens the rollover check.
Got a bill in your inbox? Check it now.
Free, no sign-up, and the working is shown for every finding.
Questions about checking many sites or half-hourly data? Contact us.